An intelligent body-shape and posture specialist — and a sales tool for stores
A full-body 3D scan in 20 seconds and a visual report of 128 metrics within a minute. AI pillow / mattress selection reports are generated from real measurement data, turning the scanning device into a closing tool. Patent no. ZL 2022 11278498.9.
Model
XK-H003
Edition
Commercial edition
Product line
3D smart body-scan mirror
Group measurement
Group measurement available as a paid add-on
Measuring accuracy
Millimetre level (vendor-rated ±1 mm, in-house 3D sensor)
Accuracy basis
Nominal value from the manufacturer; every unit is calibrated at the factory and cross-checked against a reference artefact.
How to verify
Can be verified on site: compare against a reference artefact, then measure the same person three times in a row and check the maximum deviation.
Measurement conditions
Close-fitting clothing or shorts, barefoot, standing naturally; stay as still as possible during the scan (about 3–5 seconds); hair tied back or pinned up, avoiding a high ponytail or bun that covers the head and shoulder outline
What the result covers
When these conditions are met, the data is used for preliminary screening, risk indication and follow-up comparison of posture and body composition; when they are not met (loose clothing, movement, hair covering the outline), the result is an estimate for reference only. It is not a medical diagnosis — any abnormal finding should be reviewed at a medical institution
Core capabilities
A 20-second full-body scan and a 128-metric report in 1 minute
Multi-dimensional assessment of posture, spine, body composition, girth and chest shape
AI pillow / mattress selection report: smart recommendations from real measurement data
In-store CRM plus an editable questionnaire system that recommends precisely from the answers
On-screen interaction plus phone-scanned reports, with built-in traffic generation and private-domain accumulation
Hardware specifications
Dimensions: mirror 1760×500×40mm, turntable 450×91(H)mm, minimum floor area about 1.7 m²
The device uses an in-house 3D sensor for 3D reconstruction, with vendor-rated accuracy at millimetre level (±1 mm). That figure comes with conditions: the subject wears close-fitting clothing or shorts, stands barefoot and naturally, stays as still as possible during the scan, and ties long hair up or low so it does not block the head and shoulder outline. When those conditions are not met, results serve only as an initial screen and estimate, not as a basis for diagnosis.
How quickly is a result available on site?
The result is produced on the spot. Once the measurement is done, the report can be shown to the client immediately — no waiting for back-office rendering.
Can it be used in medical settings?
The medical edition holds a Class II medical device registration certificate and is intended for medical institutions; the commercial edition is for stores and health service providers. The two are not interchangeable.
What are the space requirements?
Space and power requirements vary by model. Once the model is confirmed, your account manager will review your floor plan and then advise on placement and customer flow.
How are training and after-sales handled?
We provide standardised deployment guidance and coach training, with a dedicated account manager following the partnership throughout.
Why is there no pricing on the website?
Devices and custom products are configured by institution type, setup and scale. Quotes are not published on the website but discussed one to one with your account manager, so that online and offline figures never diverge.
Can the result be used as a diagnosis?
No. The device is positioned for screening and risk indication: under standard measurement conditions it provides body metrics and a preliminary read on posture, helping an institution decide whether further examination is warranted. It does not provide a medical diagnosis and cannot replace an in-person consultation or imaging; when a screening result is abnormal, the client should be advised to seek further assessment at a medical institution.
Where this device can be used
Sports Health · Foot-Spine Posture & Body Composition: A foot-spine posture and body-composition programme for sports health studios: the body-scan mirror reads posture and body composition while the foot scanner reads foot shape and load. Member testing becomes a standardised existing service, AI recommends the studio's own classes, and 3D custom insoles, pillows and posture-support backpacks extend training results into daily life.
Chiropractic Studio · Spine & Posture Care: For chiropractic and posture-care studios: the body-scan mirror reads spine and posture, the foot scanner reads feet and load. Pre-service assessment becomes a standardised entry point, AI recommends the studio's own chiropractic and tuina programmes, and 3D custom insoles, pillows and backpacks extend care into daily life.
Home Retail · Mattress and Pillow Customization: "Buying a mattress like getting glasses fitted": measure first, then buy. The device upgrades standard product recommendation into a standardized scientific matching process, AI recommends the store's own mattresses and pillows, and 3D custom pillows carry personalization through.
3D Printing · An On-Demand Customization Data Entry Point: A standardized 3D data entry point and steady order source for 3D printing service providers: the device standardizes data capture, AI recommends categories that suit each body's data, and three fully custom product lines stabilize capacity.
AI Store / AI 6S Store / Tech Showroom: A digital-tech experience programme for AI experience stores, AI 6S stores and tech showrooms: devices turn the experience zone into a self-pulling entry point, retail 3D health custom products, and support ODM/OEM branding for staff benefits and corporate gifting.
Health Check Centre · Integrated Foot-Spine Screening: A full foot-and-spine service for health check centres: devices turn foot-spine screening into a standardised package add-on, AI recommends the centre's own health management services, and 3D health customisation extends one-off check-ups into continuous management.
Same series and other models
Customers usually compare these models side by side — check the specs and fit.
3D Smart Body-Scan Mirror (Overseas): Intelligent body-shape and posture devices for overseas channels, with the same specifications as the domestic commercial edition
Purchase: the configuration follows organization scale and site conditions. Distribution: an order-reporting system, with each order reported and supported uniformly.
Purchase (Configured to scale)
Your organization buys the devices outright; the configuration follows organization scale and site conditions. Suited to organizations with their own venue and long-term use.
Configured to scale|Configuration adjusts to organization scale and site conditions
Suited to own scenarios|Hospitals, stores and organizations building in-house measurement capability
Standardized delivery|Device plus standardized deployment guidance and coach training
Unified after-sales|One account manager from the matching sector follows up
Distribution (Order-report system)
Your organization becomes a distributor and reports orders one by one under the order-report system, with Xianku supporting each order. Suited to service providers with channels and a customer base.
Order-report system|Each order reported, each order supported by Xianku
Suited to channel partners|You have customers and channels, with no stock capital needed
Clear scope|Distribution territory defined by region and area
Training & materials|Product training and sales materials provided
Get a proposal and get connected
Want to see how far this device can go first?
Within 30 minutes of your submission, the account manager for your sector will call you