Screening 300 students in a day: grouping, flow and records

Updated 2026-11-16

Three hundred people is not a longer queue. It is capture, changeover, re-test and record-keeping run as parallel steps, with the grouping and flow doing the work rather than scan speed.

The short answer

Three hundred people is not a matter of calling more people into a queue. It is four things run in parallel: capture, changeover, re-test and record-keeping. At the body scanner's nominal 20 seconds per person, 300 people is about 100 minutes of pure scanning; add changeover, shoes and socks, and re-tests and the day runs three to four hours — one morning plus half an afternoon. Whether it fits depends on grouping and flow, not device speed.

1. Budget the time before booking the day

StepPer personFor 300Note
Posture capture (body scanner)About 20 seconds nominalAbout 100 minutesOne standing capture covers posture, spine and composition
Foot capture (foot scanner or combined unit)About 1–2 seconds nominalAbout 5–10 minutesThe combined unit does it in the same standing capture
Changeover, shoes and socks, stance correctionAbout 15 secondsAbout 75 minutesThis is what actually consumes the day
Re-testsEstimate 5–10 percentAbout 15–30 minutesPoor stance, hair obstruction, reflective clothing

Total: three to four hours. Pure scanning is only half of it, so estimate the schedule at roughly twice the capture time.

2. Group by class, 10–15 per group

Group by class, not by student number order. Ten to fifteen works because the waiting area seats them, the teacher can count them, and one group finishes just as the next arrives — no device waiting for people, no people waiting for the device.

3. Five station roles, one job each

RoleResponsibilityDoes not do
UsherBrings the group from waiting to capture, reminds them about shoes, socks, hair accessories, backpacksOperate the device or answer questions
OperatorTriggers capture, confirms completeness, re-measures on exceptionExplain reports or keep order
RegistrationScans or confirms identity, files the report to the right personJudge whether the data is good
BriefingThirty seconds on what was seen and whether to follow upRead parameters item by item
ExceptionHandles repeated failures, anxious children, mobility needsOccupy the main capture position

With fewer people, merge: usher plus registration, briefing plus exception. Do not merge the operator — if the capture position stops, the whole line stops.

4. Four zones, one direction

Nine out of ten blockages happen in the report zone: a child stops to read, and the queue backs up into the capture position. One dedicated table there is worth more than one extra person.

5. Re-tests and non-captures must reconcile

After the session, two counts have to match: expected (roster) and captured (complete records). Any gap needs a written reason, or the data will never reconcile.

6. Records by person-visit, not by report

7. A sample day

TimeActivityPeopleKey point
07:50–08:20Set-up and self-test—Power on, trial capture with three people, verify roster and groups
08:30–11:30First batch, younger classes firstAbout 180Younger children have short attention; schedule them when energy is higher
11:30–13:30Break and reset—Clean the device, export the morning data, reconcile non-captures
13:30–16:00Second batch, older classesAbout 120Older students self-organise; one usher fewer is enough
16:00–16:40Close-out—Reconcile expected versus captured, run remaining re-tests, export summary

This leaves forty minutes of buffer. Building the buffer in is steadier than compressing 300 people into six hours — on the day, someone will be absent and someone will need a re-test.

8. Five recurring on-site problems

9. After screening: three lists, not one report

The output of group screening is three lists: complete and no obvious abnormality, worth watching, and worth further assessment. Put the grading rules into the institution's own written convention, and have one person grade a given batch so two people do not produce two conclusions. The on-site advice is only "recommended for assessment at the institution" — no conclusion is given at the screening.

Run the second year with the same capture items and the same convention, then put both rounds together. That is what filing by person-visit buys: a report is single-use, a record follows the child.

Next step

To schedule a campus or community screening, give the account manager three things: expected headcount and grade distribution, site conditions (area, lighting, whether a separate room exists), and whether data must be written back to a school or regional platform. Configuration, staffing and the day schedule follow from those. Cooperation runs as direct purchase or through a dealer arrangement; details are discussed directly.

Submit an inquiry · See the child spine solution

Note on figures: the 20-second and 1–2-second values are nominal capture times; actual per-person time varies with site conditions. Group sizes, schedule blocks and staffing are implementation suggestions and can be adjusted to school size. This article contains no pricing.

Measurement conditions and what the result covers

The accuracy figures and posture data discussed here all rest on the same measurement conditions: the person wears close-fitting clothing or shorts, is barefoot, stands naturally, stays as still as possible during the scan (about 3–5 seconds), and has hair tied back or pinned up so it does not cover the head and shoulder outline.

When these conditions are met, the data is used for preliminary screening, risk indication and follow-up comparison of posture and spinal status; when they are not met (loose clothing, movement, hair covering the outline), the result is an estimate for reference only. The device does not provide a medical diagnosis — any abnormal finding needs review at a medical institution.

Accuracy is millimetre-level (vendor nominal ±1 mm). A living body is not a calibration artefact: millimetre-level variation across three consecutive scans of the same person is normal, so read the trend from the range of several measurements rather than from a single number.

Where the data comes from

Specifications here come from the device datasheet and user manual — nothing is estimated or inferred.

Case data comes from client project records; organization names can be verified by phone. We do not use client names without authorization.

Qualification records can be looked up by certificate number in the National Medical Products Administration database.

FAQ

How do you run a 300-student screening day?
At a nominal 20 seconds per person, pure scanning is about 100 minutes, but the day fills up: changeover, re-tests, record creation and explanation all take serial time. Run capture as a pipeline and hold the explanation sessions in batches.
How many groups per class, and how large?
Ten to fifteen per group. Fewer means constant changeover, more means a crowded waiting area. Split a class into two or three groups, one being scanned, one waiting and one in the explanation session, then rotate.
How many stations does the site need?
Five: guiding, capture, re-test, registration and explanation. Each does one thing only. Overlap creates confusion, confusion causes missed students, and a missed student usually cannot be recovered the same day.
How should results be graded without overstepping?
Three tiers are common: within the reference range, review recommended, and referral to a medical institution for further assessment. The third tier is a referral only. No conclusion is drawn on campus, because outside live-measurement conditions the output is a first-pass screen and a risk note.

Related

Related articles

Related devices

Related scenarios

Tell us how your organization works and we will route you to the manager for your sector.

Request a quote

If this article helped, leave your organisation and contact details and we will put together how similar institutions have handled it.

Within 30 minutes of your submission, the account manager for your sector will call you

Request a quote

No prices are published on this site; configuration and commercial terms are discussed one-to-one with your account manager